home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19950929-19951130 / 000180_news@columbia.edu_Mon Oct 23 15:25:58 1995.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA01966
  2.   (5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Mon, 23 Oct 1995 16:24:19 -0400
  3. Received: by apakabar.cc.columbia.edu id AA20943
  4.   (5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Mon, 23 Oct 1995 16:24:17 -0400
  5. Path: news.columbia.edu!panix!bloom-beacon.mit.edu!newsxfer.itd.umich.edu!news.mathworks.com!tank.news.pipex.net!pipex!oleane!in2p3.fr!swidir.switch.ch!swsbe6.switch.ch!scsing.switch.ch!elna.ethz.ch!inf.ethz.ch!rchishol
  6. From: rchishol@iiic.ethz.ch (Rory Alexander Chisholm)
  7. Newsgroups: comp.protocols.kermit.misc
  8. Subject: Problems with Ckermit over local network.
  9. Date: 23 Oct 1995 15:25:58 GMT
  10. Organization: Dept. Informatik, Swiss Federal Institute of Technology (ETH), Zurich, CH
  11. Lines: 36
  12. Message-Id: <46gc66$bij@neptune.ethz.ch>
  13. Nntp-Posting-Host: raf6.inf.ethz.ch
  14. Apparently-To: kermit.misc@watsun.cc.columbia.edu
  15.  
  16. I'm having problems using ckermit over out local network. My setup is this:
  17. I have ckermit running on my sparcstation at home which I use to connect at
  18. 19200 to my USR dual HST modem. I then set up a V32 connection to our 
  19. university dial-in (with data compression). The dial-in is to an annex, from
  20. which I use "telnet" to connect to a local machine, I then log in and start
  21. ckermit on the remote machine to start a file transfer. My problems now include:
  22.  
  23. On connect Ckermit switches the speed back from 19200 to 9600, how can I prevent
  24. this (my modem reports a connect at 9600 yes, but this is NOT what I want).
  25.  
  26. More seriously, while transfer over ckermit works fine over the default 
  27. settings (default packet length, window size etc). I seem to be able to 
  28. increase the send (receive) packet length only to 256 bytes without problems.
  29. More accurately if I am down loading files then I chose  send packet length of
  30. 256 for the remote and the same for the local end receive packet length. The
  31. window size I set to 8 and leave the rest alone. This appears to work, any
  32. packet length higher than 256 (512, 1024 etc) seems to give me major problems
  33. with NAK/timeout (yes I did set the block check to 3). So my questions are
  34.  
  35. 1) any bright ideas about what could be causing this ? I don't think its 
  36. line noise (since this is a v32/v42 connection)
  37. 2) What would be a better set of parameters (currently I achieve something
  38. like 30% throughput)
  39.  
  40. Last but not least I use ckermit as my primary communications software is
  41. there any way to get the local ckermit it use an alternate protocol 
  42. (x-modem, y-modem, z-modem) providing thats available as a program that 
  43. reads from stdin for the local machine ? Sometimes this is all that is 
  44. available on the remote and it would be nice not to have to remember to use
  45. tip, cu, seyon or a similar abomination when I have to down load to such a 
  46. destination.
  47.  
  48. Thanks for any help in advance, regards Rory Chisholm
  49.  
  50. email: rchishol@math.ethz.ch
  51.